Difference between revisions of "About YateMMI"

From YateBTS
Jump to: navigation, search
Line 21: Line 21:
 
=== RAN ===
 
=== RAN ===
  
Our main RAN equipment is the [[http://yatebts.com/sat_site.php SatSite Model 142]], a complete 4G LTE eNodeB, containing both the radio and baseband functions.  
+
Our main RAN equipment is the '''[[http://yatebts.com/sat_site.php SatSite Model 142]]''', a complete 4G LTE eNodeB, containing both the radio and baseband functions.  
 
It can also be configured via software to operate as a 2.5G GSM/GPRS BTS+BSC.
 
It can also be configured via software to operate as a 2.5G GSM/GPRS BTS+BSC.
  
Line 27: Line 27:
  
 
1. [[link SatSite YateMMI LTE Configuration]]
 
1. [[link SatSite YateMMI LTE Configuration]]
 +
 
2. [[link SatSite YateMMI GSM Configuration]]
 
2. [[link SatSite YateMMI GSM Configuration]]
  
 
=== Core Network ===
 
=== Core Network ===
 +
 +
Our main core network equipment are:
 +
 +
* '''[[http://yatebts.com/yateucn.php YateUCN]]''', a unified core network solution that implements the following functions
 +
* all the functions and protocols of the LTE EPC (MME, S-GW, P-GW, PCRF, and PCEF)
 +
* all the functions and protocols of the LTE VoLTE IMS P-CSCF, I/S-CSCF, IWF, and BGW
 +
* all the functions and protocols of the GSM/GPRS core network (MSC/VLR/SGSN/GGSN/GMSC)

Revision as of 16:41, 1 July 2016

THIS PAGE IS A DRAFT.

An introduction to the YateMMI

The Yate MMI's purpose if that of allowing a swift and easy configuration of all the Yate-based products: YateUCN, YateHSS/HLR, SatSite and STP>

The configuration procedures are easy, without an excess of technical information. The YateMMI does not demand special training or a dedicated network administrator to handle the overall configuration (especially not for the standard settings).

The YateMMI is installed on the first product you purchased or can be installed on a separate equipment, and can be accessed remotely from any part of the world. It uses the JSON API of each equipment. The MMI was created with the purpose of aiding operators in typical configuration scenarios. For more special configuration scenarios, a dedicated extension will be provided.

The Yate MMI allows to set generic information about the network, the roaming partners settings, the interconnect settings, the equipment settings, as well as the subscriber management for the YateHSS/HLR. All these configurations are done though wizards (link here).


Types of equipment

RAN

Our main RAN equipment is the [SatSite Model 142], a complete 4G LTE eNodeB, containing both the radio and baseband functions. It can also be configured via software to operate as a 2.5G GSM/GPRS BTS+BSC.

For configuring and managing the SatSite via the YateMMI, refer to the following pages:

1. link SatSite YateMMI LTE Configuration

2. link SatSite YateMMI GSM Configuration

Core Network

Our main core network equipment are:

  • [YateUCN], a unified core network solution that implements the following functions
* all the functions and protocols of the LTE EPC (MME, S-GW, P-GW, PCRF, and PCEF)
* all the functions and protocols of the LTE VoLTE IMS P-CSCF, I/S-CSCF, IWF, and BGW
* all the functions and protocols of the GSM/GPRS core network (MSC/VLR/SGSN/GGSN/GMSC)