Difference between revisions of "About YateMMI"

From YateBTS
Jump to: navigation, search
(Created page with "'''THIS PAGE IS A DRAFT.''' The Yate MMI's purpose if that of allowing a swift and easy configuration of all the Yate-based products: YateUCN, YateHSS/HLR, SatSite and STP>...")
 
Line 1: Line 1:
 
'''THIS PAGE IS A DRAFT.'''
 
'''THIS PAGE IS A DRAFT.'''
 +
 +
== An introduction to the YateMMI ==
  
 
The Yate MMI's purpose if that of allowing a swift and easy configuration of all the Yate-based products: YateUCN, YateHSS/HLR, SatSite and STP>  
 
The Yate MMI's purpose if that of allowing a swift and easy configuration of all the Yate-based products: YateUCN, YateHSS/HLR, SatSite and STP>  
Line 13: Line 15:
 
The Yate MMI allows to set generic information about the network, the roaming partners settings, the interconnect settings, the equipment settings, as well as the subscriber management for the YateHSS/HLR.
 
The Yate MMI allows to set generic information about the network, the roaming partners settings, the interconnect settings, the equipment settings, as well as the subscriber management for the YateHSS/HLR.
 
All these configurations are done though wizards (link here).
 
All these configurations are done though wizards (link here).
 +
 +
 +
== Types of equipment ==
 +
 +
=== RAN ===
 +
 +
Our main RAN equipment is the [[http://yatebts.com/sat_site.php SatSite Model 142]], a complete 4G LTE eNodeB, containing both the radio and baseband functions.
 +
It can also be configured via software to operate as a 2.5G GSM/GPRS BTS+BSC.
 +
 +
For configuring and managing the SatSite via the YateMMI, refer to the following pages:
 +
 +
1. [[link SatSite YateMMI LTE Configuration]]
 +
2. [[link SatSite YateMMI GSM Configuration]]
 +
 +
=== Core Network ===

Revision as of 15:32, 1 July 2016

THIS PAGE IS A DRAFT.

An introduction to the YateMMI

The Yate MMI's purpose if that of allowing a swift and easy configuration of all the Yate-based products: YateUCN, YateHSS/HLR, SatSite and STP>

The configuration procedures are easy, without an excess of technical information. The YateMMI does not demand special training or a dedicated network administrator to handle the overall configuration (especially not for the standard settings).

The YateMMI is installed on the first product you purchased or can be installed on a separate equipment, and can be accessed remotely from any part of the world. It uses the JSON API of each equipment. The MMI was created with the purpose of aiding operators in typical configuration scenarios. For more special configuration scenarios, a dedicated extension will be provided.

The Yate MMI allows to set generic information about the network, the roaming partners settings, the interconnect settings, the equipment settings, as well as the subscriber management for the YateHSS/HLR. All these configurations are done though wizards (link here).


Types of equipment

RAN

Our main RAN equipment is the [SatSite Model 142], a complete 4G LTE eNodeB, containing both the radio and baseband functions. It can also be configured via software to operate as a 2.5G GSM/GPRS BTS+BSC.

For configuring and managing the SatSite via the YateMMI, refer to the following pages:

1. link SatSite YateMMI LTE Configuration 2. link SatSite YateMMI GSM Configuration

Core Network