JSON API for SatSite Configuration

From YateBTS
Revision as of 18:03, 25 July 2016 by Dana (Talk | contribs) (set_outbound)

Jump to: navigation, search

Requests

get_node_type

Retrieve installed nodes on equipment and set sdr_mode. The available nodes are: "bts" and "enb" and depending on your installation you will have one of them or both. The "sdr_mode" represents the working mode of the equipment. There are four working modes:

  • nib
  • roaming
  • dataroam
  • enb
Usage:
{"request":"get_node_type","node":"satsite","params":[]}
Returns:
{"code":0,"node_type":[{"type":"bts","version":"unknown","sdr_mode":"roaming"},{"type":"enb","version":"unknown","sdr_mode":"roaming"}]} 

set_sdr_mode

Sets the "sdr_mode" that represents the working mode of the equipment. There are four working modes tat can be set:

  • nib
  • roaming
  • dataroam
  • enb
Usage:
{"request":"set_sdr_mode","node":"satsite","params":{"sdr_mode":"dataroam"}}
Returns:
{"code":0}

set_bts_node

Sets the parameters for a BTS node.


Usage:

{"request":"set_bts_node",
 "node":"satsite",
 "params":{
          "ybts":{
                 "gsm":{
                        "Radio.Band":"850","Radio.C0":"130","Identity.MCC":"001","Identity.MNC":"05","Identity.LAC":"1000"," 
                        "Identity.CI":"10","Identity.BSIC.BCC":"2","Identity.BSIC.NCC":"0","Identity.ShortName":"YateBTS",
                        "Radio.PowerManager.MaxAttenDB":"10","Radio.PowerManager.MinAttenDB":"0"},
                 "gprs":{"Enable":"off","RAC":"0","RA_COLOUR":"0"},
                 "gsm_advanced":{
                         "Channels.NumC1s":"7","Channels.NumC7s":"0","Channels.C1sFirst":"off","Channels.SDCCHReserve":"0",
                         "CCCH.AGCH.QMax":"5","CCCH.CCCH-CONF":"1","CellOptions.RADIO-LINK-TIMEOUT":"15","CellSelection.CELL-RESELECT-HYSTERESIS":"3",
                         "CellSelection.MS-TXPWR-MAX-CCH":"0","CellSelection.NCCsPermitted":"-1","CellSelection.NECI":"1",
                         "CellSelection.RXLEV-ACCESS-MIN":"0","Cipher.CCHBER":"0.0","Cipher.Encrypt":"off","Cipher.RandomNeighbor":"0.0",
                         "Cipher.ScrambleFiller":"off","Control.GPRSMaxIgnore":"5","Handover.InitialHoldoff":"5000","Handover.RepeatHoldoff":"3000",
                         "Handover.LocalRSSIMin":"-80","Handover.ThresholdDelta":"10","MS.Power.Damping":"50","MS.Power.Max":"33",
                         "MS.Power.Min":"5","MS.TA.Damping":"50","MS.TA.Max":"62","MaxSpeechLatency":"2","Neighbors.NumToSend":"8",
                         "Ny1":"5","RACH.AC":"0x0400","RACH.MaxRetrans":"1","RACH.TxInteger":"14","Radio.ARFCNs":"1","Radio.MaxExpectedDelaySpread":"2",
                         "Radio.NeedBSIC":"off","Radio.PowerManager.NumSamples":"10","Radio.PowerManager.Period":"6000",
                         "Radio.PowerManager.SamplePeriod":"2000","Radio.PowerManager.TargetT3122":"5000",
                         "Radio.RSSITarget":"-50","Radio.RxGain":"","ShowCountry":"off","Timer.T3103":"5000","Timer.T3105":"50","Timer.T3113":"10000",
                         "Timer.T3122Max":"255000","Timer.T3122Min":"2000","Timer.T3212":"24"},
                "gprs_advanced":{
                          "Debug":"off","MS.Power.Alpha":"10","MS.Power.Gamma":"31","MS.Power.T_AVG_T":"15","MS.Power.T_AVG_W":"15",
                          "Multislot.Max.Downlink":"3","Multislot.Max.Uplink":"2","Codecs.Downlink":"14","Codecs.Uplink":"14",
                          "Uplink.KeepAlive":"300","Uplink.Persist":"4000","TBF.Downlink.Poll1":"10","TBF.EST":"off","TBF.Expire":"30000",
                          "TBF.KeepExpiredCount":"20","TBF.Retry":"1","advanceblocks":"10","CellOptions.T3168Code":"5",
                          "CellOptions.T3192Code":"0","ChannelCodingControl.RSSI":"-40","Channels.Congestion.Threshold":"200",
                          "Channels.Congestion.Timer":"60","Channels.Min.C0":"3","Channels.Min.CN":"0","Channels.Max":"4","Counters.Assign":"10",
                          "Counters.N3101":"20","Counters.N3103":"8","Counters.N3105":"12","Counters.Reassign":"6","Counters.TbfRelease":"5",
                          "Downlink.KeepAlive":"300","Downlink.Persist":"0","LocalTLLI.Enable":"off","MS.KeepExpiredCount":"20",
                          "NC.NetworkControlOrder":"2","NMO":"2","PRIORITY-ACCESS-THR":"6","RRBP.Min":"0","Reassign.Enable":"off",
                          "SendIdleFrames":"off","SGSN.port":"1920","Timers.Channels.Idle":"6000","Timers.MS.Idle":"600",
                          "Timers.MS.NonResponsive":"6000","Timers.T3169":"5000","Timers.T3191":"5000","Timers.T3193":"0","Timers.T3195":"5000"},
               "control":{"VEA":"off","LUR.AttachDetach":"off","SACCHTimeout.BumpDown":"1"},
               "roaming":{
                          "expires":"3600","reg_sip":"192.168.1.245:5058","nodes_sip":"","nnsf_bits":"8","gstn_location":"5",
                          "text_sms":"off","my_sip":"192.168.168.208"},
               "handover":{"enable":"on","neighbors":"","reason":"GSM;text=\"Handover\""},
               "ybts":{
                       "mode":"roaming","heartbeat_ping":"3000","heartbeat_timeout":"60000","handshake_start":"60000","max_restart":"10",
                       "peer_cmd":"${modulepath}\/server\/bts\/mbts","peer_arg":"","peer_dir":"${modulepath}\/server\/bts",
                       "print_msg":"yes","print_msg_data":"verbose","imei_request":"off","tmsi_expire":"864000","t305":"30000",
                       "t308":"5000","t313":"5000","sms.timeout":"300000","ussd.session_timeout":"600000","export_xml_as":"object"},
              "security":{"t3260":"720000","auth.call":"off","auth.sms":"off","auth.ussd":"off"},
              "transceiver":{"Path":".\/transceiver","Args":"","MinimumRxRSSI":"-63","RadioFrequencyOffset":"","TxAttenOffset":"","Timeout.Clock":"10"},
              "test":{"SimulatedFER.Downlink":"0","SimulatedFER.Uplink":"0","UplinkFuzzingRate":"0"},
              "tapping":{"GSM":"off","GPRS":"off","TargetIP":"127.0.0.1"}
              }
      }
}


Returns:
{"code":0,"node":null} - on success or 
{"code":"401","message":"ybts: Field 'expires' should be numeric in section 'roaming'."} - for errors

get_bts_node

Retrieve the BTS configuration of an equipment. That means the parameters set in ybts, satsite and ybladerf.

Usage:

{"request":"get_bts_node","node":"satsite","params":[]}

Returns:

{"code":0,
"node":{
         "ybts":{
                "general":{"updated":"Wednesday, 20-Jul-16 12:36:40 GMT from 172.31.0.108","locked":"false"},
                "gsm":{      
                      "Radio.Band":"850","Radio.C0":"130","Identity.MCC":"001","Identity.MNC":"05",
                      "Identity.LAC":"1000","Identity.CI":"10","Identity.BSIC.BCC":"2","Identity.BSIC.NCC":"0",
                      "Identity.ShortName":"YateBTS","Radio.PowerManager.MaxAttenDB":"10",
                      "Radio.PowerManager.MinAttenDB":"0"},
                 "gprs":{"Enable":"off","RAC":"0","RA_COLOUR":"0"},
                 "ggsn":{ 
                        "Firewall.Enable":"1","IP.MaxPacketSize":"1520","IP.ReuseTimeout":"180","IP.TossDuplicatePackets":"off",
                        "Logfile.Name":"ggsn.log","MS.IP.Base":"192.168.99.1","MS.IP.MaxCount":"254","TunName":"sgsntun"},
                 "transceiver":{"Path":".\/transceiver","MinimumRxRSSI":"-23","Timeout.Clock":"10"},
                 "control":{"VEA":"off","LUR.AttachDetach":"off","SACCHTimeout.BumpDown":"1"},
                 "tapping":{"GSM":"off","GPRS":"off","TargetIP":"127.0.0.1"},
                 "gsm_advanced":{"Channels.NumC1s":"7","Channels.NumC7s":"0","Channels.C1sFirst":"off","Channels.SDCCHReserve":"0",
                                 "CCCH.AGCH.QMax":"5","CCCH.CCCH-CONF":"1","CellOptions.RADIO-LINK-TIMEOUT":"15",
                                 "CellSelection.CELL-RESELECT-HYSTERESIS":"3","CellSelection.MS-TXPWR- MAX-CCH":"0",
                                 "CellSelection.NCCsPermitted":"-1","CellSelection.NECI":"1",
                                 "CellSelection.RXLEV-ACCESS-MIN":"0","Cipher.CCHBER":"0.0","Cipher.Encrypt":"off",
                                 "Cipher.RandomNeighbor":"0.0","Cipher.ScrambleFiller":"off",
                                 "Control.GPRSMaxIgnore":"5","Handover.InitialHoldoff":"5000","Handover.RepeatHoldoff":"3000",
                                 "Handover.LocalRSSIMin":"- 80","Handover.ThresholdDelta":"10","MS.Power.Damping":"50",
                                 "MS.Power.Max":"33","MS.Power.Min":"5","MS.TA.Damping":"50","MS.TA.Max":"62",
                                 "MaxSpeechLatency":"2","Neighbors.NumToSend":"8","Ny1":"5","RACH.AC":"0x0400",
                                 "RACH.MaxRetrans":"1",RACH.TxInteger":"14","Radio.ARFCNs":"1","Radio.MaxExpectedDelaySpread":"2",
                                 "Radio.NeedBSIC":"off","Radio.PowerManager.NumSamples":"10","Radio.PowerManager.Period":"6000",
                                 "Radio.PowerManager.SamplePeriod":"2000","Radio.PowerManager.TargetT3122":"5000",
                                 "Radio.RSSITarget":"-50","ShowCountry":"off","Timer.T3103":"5000","Timer.T3105":"50",
                                 "Timer.T3113":"10000","Timer.T3122Max":"255000","Timer.T3122Min":"2000","Timer.T3212":"24"}, 
                                                                 
                 "gprs_advanced": {"Debug":"off","MS.Power.Alpha":"10","MS.Power.Gamma":"31","MS.Power.T_AVG_T":"15",
                                  "MS.Power.T_AVG_W":"15","Multislot.Max.Downlink":"3",
                                   "Multislot.Max.Uplink":"2","Codecs.Downlink":"14","Codecs.Uplink":"14",
                                  "Uplink.KeepAlive":"300","Uplink.Persist":"4000","TBF.Downlink.Poll1":"10","TBF.EST":"off",         
                                  "TBF.Expire":"30000","TBF.KeepExpiredCount":"20","TBF.Retry":"1","advanceblocks":"10",
                                  "CellOptions.T3168Code":"5","CellOptions.T3192Code":"0","ChannelCodingControl.RSSI":"-40",
                                   "Channels.Congestion.Threshold":"200","Channels.Congestion.Timer":"60","Channels.Min.C0":"3",
                                  "Channels.Min.CN":"0","Channels.Max":"4","Counters.Assign":"10","Counters.N3101":"20","Counters.N3103":"8",
                                   "Counters.N3105":"12","Counters.Reassign":"6","Counters.TbfRelease":"5","Downlink.KeepAlive":"300",
                                  "Downlink.Persist":"0","LocalTLLI.Enable":"off","MS.KeepExpiredCount":"20","NC.NetworkControlOrder":"2","NMO":"2",
                                   "PRIORITY-ACCESS-THR":"6","RRBP.Min":"0","Reassign.Enable":"off","SendIdleFrames":"off","SGSN.port":"1920",
                                   "Timers.Channels.Idle":"6000","Timers.MS.Idle":"600","Timers.MS.NonResponsive":"6000",
                                   "Timers.T3169":"5000","Timers.T3191":"5000","Timers.T3193":"0","Timers.T3195":"5000"},
                "sgsn":{"Debug":"off","Timer.ImplicitDetach":"3480","Timer.MS.Idle":"600","Timer.RAUpdate":"3240","Timer.Ready":"44"},
                "test":{"SimulatedFER.Downlink":"0","SimulatedFER.Uplink":"0","UplinkFuzzingRate":"0"},
                "ybts":{"mode":"dataroam","heartbeat_ping":"3000","heartbeat_timeout":"60000","handshake_start":"60000","max_restart":"10",
"peer_cmd":"${modulepath}\/server\/bts\/mbts","peer_dir":"${modulepath}\/server\/bts","print_msg":"yes","print_msg_data":"verbose","imei_request":"off","tmsi_expire":"864000","t305":"30000","t308":"5000",
"t313":"5000","sms.timeout":"300000","ussd.session_timeout":"600000","export_xml_as":"object"},
                "security":{"t3260":"720000","auth.call":"off","auth.sms":"off","auth.ussd":"off"}
         },
         "satsite":{
                       "general":{"updated":"","locked":"","sdr_mode":"bts"},
                       "basic":{}, 
                       "site-equipment":{},
                       "test":{}},
         "ybladerf":{
                       "general":[],
                       "libusb":[],
                       "filedump":[]
          }
    }
}

set_enb_node

Sets the ENB configurations. That means that the parameters set in openenb object will be written in openenb.conf, and the parameters from 'gtp' object will be written in file gtp.conf. Before writting all parameters will be validated.

Usage:
{"request":"set_enb_node",
 "node":"satsite",
 "params":{
     "gtp":{
         "sgw":{"addr6":"","addr4":"::1:222"}
      },
     "openenb":{
         "basic":{"enodebId":"10","MCC":"001","MNC":"55","TAC":"10","CellIdentity":"0000001","Name":"EnbMonica","Band":"3","Bandwidth":"25","EARFCN":"1575","NID1":"4","NID2":"2","Prach.RootSequence":"0","Prach.FreqOffset":"9","Pusch.RefSigGroup":"2","OutputLevel":"40","CrestFactor":"13","DistributedVrbs":"on","SiWindowLength":"20","SiPeriodicity":"8","SiRedundancy":"2","DefaultPagingCycle":"32","RxLevelMinimum":"-22","Pdsch.RefPower":"-20","Pusch.Qam64":"off","Pusch.CyclicShift":"3","Pucch.Delta":"1","Pucch.RbCqi":"3","Pucch.CsAn":"3","Pucch.An":"45","Prach.Preambles":"4","Prach.PowerStep":"4","Prach.InitialTarget":"-90","Prach.TransMax":"200","Prach.ResponseWindow":"10","Prach.ContentionTimer":"64","Prach.ConfigIndex":"14","Prach.ZeroCorr":"1","CFI":"2","Ng":"one","PdcchFormat":"2"},
         "bearers":{"Srb1.mode":"unacknowledged","Srb2.mode":"acknowledged"},
         "advanced":{"GridLength":"8","LeadModulation":"14","LeadScheduling":"2","RadioPriority":"high","ModulatorPriority":"high","SchedulerPriority":"normal"},
         "scheduler":{"SibModulationRate":"2","SibDci":"dci1a","PcchMcs":"2","PcchDci":"dci1a","RarMcs":"2","RarDci":"dci1a","downlinkDci":"dci1a","uplinkDci":"dci0","UplinkRbs":"1","UplinkRbStartIndex":"5","DistributedVrbs":"on","PrachResponseDelay":"5"},
         "radiohardware":{"MaximumOutput":"43","ReceiverReference":"-20"},
         "measurements":{"reportingPeriod":"15","reportingPath":""}, 
         "mme1": {"address":"192.167.1.1", "local":"10.1.1.1"}, 
         "mme2": {"address":"192.1.1.1", "local":"10.1.1.1"}
     }
  }
}

get_enb_node

Retrieve the ENB configuration of an equipment.

Usage:
{"request":"get_enb_node","node":"satsite","params":[]}
Response:

{"code":0,"node":{
               "gtp":{"general":{"updated":"Monday, 18-Jul-16 13:15:49 GMT from 172.31.0.108","locked":"false"},
               "sgw":{"addr4":"192.168.168.208","type":"gtp-access"}},
               "openenb":{"general":{"updated":"Monday, 18-Jul-16 11:56:51 GMT from 172.31.0.108","locked":"false"},
                          "basic":{
                                   "enodebId":"10","MCC":"001","MNC":"55","TAC":"10","CellIdentity":"0000001","Name":"Enb",
                                   "Band":"3","Bandwidth":"25","EARFCN":"1575","NID1":"4","NID2":"2","Prach.RootSequence":"0",
                                   "Prach.FreqOffset":"9","Pusch.RefSigGroup":"2","OutputLevel":"40","CrestFactor":"13",
                                   "DistributedVrbs":"on","SiWindowLength":"20","SiPeriodicity":"8","SiRedundancy":"2",
                                   "DefaultPagingCycle":"32","RxLevelMinimum":"-22","Pdsch.RefPower":"-20","Pusch.Qam64":"off",
                                   "Pusch.CyclicShift":"3","Pucch.Delta":"1","Pucch.RbCqi":"3","Pucch.CsAn":"3","Pucch.An":"45",
                                   "Prach.Preambles":"4","Prach.PowerStep":"4","Prach.InitialTarget":"-90",
                                   "Prach.TransMax":"200","Prach.ResponseWindow":"10","Prach.ContentionTimer":"64","Prach.ConfigIndex":"14",
                                   "Prach.ZeroCorr":"1","CFI":"2","Ng":"one","PdcchFormat":"2"},
                          "scheduler":{
                                   "SibModulationRate":"2","SibDci":"dci1a","PcchMcs":"2","PcchDci":"dci1a","RarMcs":"2","RarDci":"dci1a",
                                   "downlinkDci":"dci1a","uplinkDci":"dci0","UplinkRbs":"1","UplinkRbStartIndex":"5",
                                   "DistributedVrbs":"on","PrachResponseDelay":"5"}                               
                          "bearers":{"Srb1.mode":"unacknowledged","Srb2.mode":"acknowledged"},
                          "radiohardware":{"MaximumOutput":"43","ReceiverReference":"-20"},
                          "advanced":{
                                    "GridLength":"8","LeadModulation":"14","LeadScheduling":"2","RadioPriority":"high",
                                    "ModulatorPriority":"high","SchedulerPriority":"normal"},
                          "mme1":{"address":"192.167.1.1","local":"fe80::96de:80ff:fe7b:36fa"}
              },
              "satsite":{"general":{"updated":"","locked":"","sdr_mode":"bts"},"basic":{},
              "site-equipment":{}},
              "ybladerf":{"general":[],"libusb":[],"filedump":[]}
     }
}

set_subscribers

Request that writes the received parameters in subscribers.conf file.

Note! Subscribers are accepted based on two criteria: regular expression that matches the IMSI or they are inserted individually.
If in request 'subscribers' and 'regexp' is filled, then an error is returned.
Usage:
{"request":"set_subscribers","node":"satsite",
"params":{
   "subscribers":{
           "001010000000001":{"IMSI":"001010000000001","Msisdn":"88250001", "Short number":"001", "active":"on","Ki":"*", "OP":"",
                              "IMSI type":"2G","ICCID":"","SMSC":"2222","OPC":""},
           "001010000000002":{"IMSI":"001010000000002","Msisdn":"88250002", "Short number":"002", "active":"on", "Ki":"*","OP":"", 
                              "IMSI type":"2G","ICCID":"","SMSC":"2222","OPC":""}
   },
   "regexp":{},
   "gw_sos":"112",
   "smsc":"2222",
   "country_code":"001"

}

Response:
{"code":0} - on success
{"code":402, "message": "Error message"} - on failure

get_subscribers

Retrieve all the configuration from subscribers.conf if 'params' is empty. The parameters that can be requested are:

  • subscribers with {"limit": , "offset": } -- retrieve subscribers in parameter 'subscribers'
  • subscribers with no parameters {} -- retrieve subscriber count in parameter 'count'
  • subscribers with { "imsi": ,/ "msisdn": } -- retrieve specific subscriber based of various criteria in parameter 'subscribers'
  • regexp
  • smsc
  • country_code
  • gw_sos


Usage:
{"request":"get_subscribers","node":"satsite","params":[]}
Returns:
{"code":0,"node":{
   "subscribers":{
           "001010000000001":{"IMSI":"001010000000001","Msisdn":"88250001", "Short number":"001", "active":"on","Ki":"*", "OP":"",
                              "IMSI type":"2G","ICCID":"","SMSC":"2222","OPC":""},
           "001010000000002":{"IMSI":"001010000000002","Msisdn":"88250002", "Short number":"002", "active":"on", "Ki":"*","OP":"", 
                              "IMSI type":"2G","ICCID":"","SMSC":"2222","OPC":""}
   },
   "gw_sos":"112",
   "smsc":"2222",
   "country_code":"001"
  }
}  

Another example:

Usage:
{"request":"get_subscribers","node":"satsite","params":["subscribers":{"limit":20,"offset":0}]}
Returns:
{"code":0,"node":{
   "subscribers":{
           "001010000000001":{"IMSI":"001010000000001","Msisdn":"88250001", "Short number":"001", "active":"on","Ki":"*", "OP":"",
                              "IMSI type":"2G","ICCID":"","SMSC":"2222","OPC":""},
           "001010000000002":{"IMSI":"001010000000002","Msisdn":"88250002", "Short number":"002", "active":"on", "Ki":"*","OP":"", 
                              "IMSI type":"2G","ICCID":"","SMSC":"2222","OPC":""}
   }
 }

delete_subscriber

Deletes a specified subscriber.

Usage:
{"request":"get_online_subscribers","node":"satsite","params":{"imsi":"001012531201012"}}
Returns:
{"code":0}


get_online_subscribers

Retrieve the subscribers that are online in the request is done.

Usage:
{"request":"get_online_subscribers","node":"satsite","params":{"limit":20, "offset":0}}
Returns:
{"code":0, node:{"online_subscribers": {"imsi":"001011601284670", "msisdn":""}, {"imsi":"001990010001014", "msisdn":"882005"}}}

get_rejected_imsis

Retrieve rejected IMSIs.

Usage:
{"request":"get_rejected_imsis","node":"satsite","params":{"limit":20, "offset":0}}
Returns:
{"code":0, rejected_imsi:{"imsi":"00130040050033"},{"imsi":"00130040050034"},{"imsi":"00130040050035"} }

get_call_logs

Retrieves the file specified in params.

Usage:
{"request":"get_call_logs","node":"satsite","params":{"yate-cdr.csv"}}
Returns:
{"code":0} -- on success
{"code":!0, "message":""} -- on failure

set_outbound

Sets outbound connection in accfile.conf. The following parameters usually define a valid account:

  • protocol: The protocol to register on (sip or iax)
  • username: Account username
  • password: Account password
  • interval: Registration interval (in seconds) to request from server
  • server: Registrar IP address
  • enabled: yes/no

An account is valid if it has parameter enabled set to true or if parameter enabled is missing but the parameter username is set.

In some cases, depending on the gateway you wish to connect to, you might need to set some protocol specific information.

1. For SIP:

  • description: Caller name to set on outgoing calls on this account if none specified when routing
  • registrar: Registrar address. A port can be specified here (e.g. 1.2.3.4:7999)
  • authname: Authentication name to use instead of username when authenticating
  • domain: Authentication domain if any
  • outbound: Optional outbound proxy server if different from registrar.
  • ip_transport: Optional SIP transport to use (udp, tcp, tls).
  • ip_transport_remoteip: IP address to connect to register the account.
  • ip_transport_remoteport: IP port to connect to register the account
  • ip_transport_localip: UDP: This parameter is used in conjuction ip_transport_localport to identify the transport to use
  • ip_transport_localport: Local port.
  • localaddress: Local address to set in sent messages
  • keepalive: Optional interval for NAT keep alive.

2. IAX:

  • server: Registrar address or domain. A port can be specified here (e.g. 1.2.3.4:7999)
  • port: Registrar port if not specified in 'server' parameter
  • connection_id: The name of the iax listener to use for registration and outgoing calls
  • ip_transport_localip: This parameter is used in conjuction ip_transport_localport to identify the listener to use for registration and outgoing calls
  • ip_transport_localport: Local port. This parameter is used to identify the listener to use for registration and outgoing calls
  • trunking: Enable trunking for outgoing calls sent on this line
  • trunk_timestamps: Configure how trunked audio data is sent, enable it for trunked data with timestamps and disable it to send trunked data without timestamps
  • trunk_sendinterval: Interval, in milliseconds, to send trunked trunked audio data
  • trunk_maxlen: Maximum value for trunked data frames
  • trunk_nominits_sync_use_ts: Configure how to re-build timestamps when processing incoming trunked audio without miniframe timestamps
  • trunk_nominits_ts_diff_restart: The difference (in milliseconds) between current timestamp and first timestamp of incoming trunked audio data without miniframe timestamps at which to restart timestamps build data
  • trunk_efficient_use: Use the trunk efficiently: don't send trunking data when there is only 1 call using it


Usage:
{"request":"set_outbound",
 "node":"satsite",
 "params":{
       "protocol":"sip","username":"my_user", "password":"secret","server":"192.168.168.1",
       "enabled":"yes"
  }
}

get_outbound

Retrieve the outbound connection set:

Usage:
{"request":"get_outbound","node":"satsite","params":[]}
Returns:
{"code":0,
 "node":{
       "protocol":"sip","username":"my_user", "password":"secret","server":"192.168.168.1",
       "enabled":"yes"
  }
}