Minimum configuration to start your YateBTS

From YateBTS
Revision as of 15:28, 23 December 2014 by Gratiela.dumitrica (Talk | contribs)

Jump to: navigation, search

As an absolute minimum your ybts.conf must configure the radio frequency used:

[gsm]
Radio.Band=BBB
Radio.C0=NNN

where BBB is the radio band (850, 900, 1800 or 1900) and NNN is the ARFCN of the first channel.

Make sure you have the right to use that radio frequency you selected. Please do not break your local law.

A minimal configuration of this type will use the default identity MCC=001 MNC=01 LAC=1000 (0x3e8) CI=10 (0x000a). Most phones will identify it as Test or Test PLMN.

Below is an example for channel 50 of GSM900 (900MHz uplink, 945MHz downlink):

[gsm]
Radio.Band=900
Radio.C0=50