Difference between revisions of "Wireshark monitoring traffic inside YateBTS"

From YateBTS
Jump to: navigation, search
Line 1: Line 1:
  
Using YateBTS in '''GSM roaming''' and '''GSM dataroam''' working modes traffic can be captured/analized with Wireshark.
+
Traffic can be captured/analized with Wireshark in YateBTS when using '''GSM roaming''' or '''GSM dataroam''' working modes.
  
 +
Do do so:
 
* Enable GSMTAP.GSM capture from the Yate rmanager (telnet 0 5037)
 
* Enable GSMTAP.GSM capture from the Yate rmanager (telnet 0 5037)
 
** mbts config TAP Control.GSMTAP.GSM on (GSMTAP.GSM will capture '''SIP and RTP packages''')
 
** mbts config TAP Control.GSMTAP.GSM on (GSMTAP.GSM will capture '''SIP and RTP packages''')

Revision as of 12:56, 21 September 2017

Traffic can be captured/analized with Wireshark in YateBTS when using GSM roaming or GSM dataroam working modes.

Do do so:

  • Enable GSMTAP.GSM capture from the Yate rmanager (telnet 0 5037)
    • mbts config TAP Control.GSMTAP.GSM on (GSMTAP.GSM will capture SIP and RTP packages)
  • Enable GSMTAP.GPRS capture from the Yate rmanager
    • mbts config TAP Control.GSMTAP.GPRS on (GSMTAP.GPRS will capture GTP-C and GTP-U packages)
  • To check if GSMTAP is enabled type mbts config TAP in Yate rmanager.
yate-sdr@ybts-UNCONFIG> mbts config TAP 
Control.GSMTAP.GPRS on
Control.GSMTAP.GSM on
Control.GSMTAP.TargetIP 127.0.0.1     [default]
yate-sdr@ybts-UNCONFIG> 
  • To capture traffic use tcpdump: tcpdump -i any udp port 4729 -w GSMTAP-yatebts.pcap
  • Or Wireshark, already installed on the LatKit/SatSite by adding a custom filter: udp port 4729.