Unified EPC/IMS core network
YateUCN is a unified core network solution intended for new LTE networks, for upgrading GSM/GPRS networks to LTE or for extending existing LTE networks.
The YateUCN software-defined core implements all the functions and protocols of the LTE core network in software, and uses commodity hardware (e.g. Dell PowerEdge R430).
YateUCN integrates the EPC layers - MME, PGW, SGW, PCRF, and PCEF and also includes the IMS layers for VoLTE - PCSCF, ISCSCF, IWF, and BGW.
It communicates with the YateENB (LTE eNodeB module) over S1AP and GTP protocols and uses a JSON API for configuration and management.
Unified GSM/GPRS core network
YateUCN also implements the functions and protocols of GSM/GPRS core networks. In GSM/GPRS, the YateUCN acts as a MSC/VLR/SGSN/GGSN/GMSC in a single server.
It connects to the YateBTS (GSM module) over GTP and SIP, replacing the costly SS7 MAP-A interface (BSSAP protocol). This leads to a higher return on investment without affecting the reliability of the network or the provided services.
The unified core network solution is based on replacing the eNodeB with the YateENB (LTE) and the base station subsystem with the YateBTS (GSM).
Many areas in the world are not covered by a cellular network due to the cost of existing circuit-switched network technology.
YateUCN brings a new solution for deploying GSM/LTE networks at a lower cost.
YateUCN, the Unified LTE/GSM/GPRS Core Network
This section contains information about the unified YateUCN.
General information about YateUCN, as an LTE/GSM/GPRS core network server.
Configuration parameters necessary for each mobile network node type.
General information about the JSON API and how you can use it for node configuration, set up or management.
Instructions on how to use the JSON API to configure YateUCN.
Instructions on how to use the JSON API to retrieve information about node statistics, data sessions and more.
Learn how to configure YateUCN using YateMMI.
Generic information about the YateMMI management interface.
Generic information about licensing system.
Learn how to configure zabbix module to send performance data to Zabbix server.
YateUCN as an MME/SGW
This section contains information about configuring YateUCN's MME and SGW functions.
YateUCN as an GGSN/PGW
This section contains information and configuration examples used for charging functions.
Information about how to configure YateUCN charging interfaces.
General information and examples of iptables on YateUCN for the GGSN/PGW.
YateUCN as an IMS
This section contains information about configuring YateUCN for IMS
General information about the YateUCN IMS CSCF.
Configuring the YateUCN IMS CSCF.
Information about setting up a SIP listener for outbound calls.